Step 1: Clean application surface throughly (DO NOT use ammonia based cleaner such as Windex). Place decal on desired location and apply masking tape across the top, creating a hinge.

Step 2: Flip decal up and pull backing paper off, exposing adhesive.

Step 3: Bring decal down while still holding the bottom end up; apply firm pressure with your thumb (or with squeegee) and rub graphic area from center out to edges forcing all the air out.

Step 4: Let decal sit for a few minutes, then gently remove transfer tape by pulling it straight back, leaving the graphic on the surface. If you notice any air bubbles, use a pin and poke a tiny hole. Then squeeze the air bubble out by using your thumb or squeegee.

Done! Your are now ready to show off your new decal.

Yes, you should be able to peel it right off in warm weather. If it is giving you trouble, use a hair dryer. You won't be able to re-apply it afterwards.

No, the vinyl material will not harm these surfaces. It will actually protect them and act as a shield to the sun, UV rays, dust, scratches etc.

All our vinyl decals and graphics can be applied to any smooth, non-porous surface. Please make sure the surface is clean and oil free. Surface quality is a major factor in the life and durability of vinyl.

Yes, we do. We offer a wide range of services, from graphics design to custom graphics. Contact us for info.